KHT-400
Brand: GEMMY Industrial | Category: Medical Equipment
KHT-400 is listed by GEMMY within its micro haematocrit centrifuge range, alongside the KHT-410 and KHT-410E. The manufacturer publishes no product name, no specification, no key features and no approval details for this model; the page carries only the model number and a product photograph. Specification, capillary tube capacity and speed should be confirmed with GEMMY before the model is offered.
Selected manufacturer specifications
| Parameter | Value |
|---|---|
| Dimensions | 260 × 280 × 240 mm |
| Net weight | 7.5 kg approx. |
| Motor | 100 W brush AC motor |
| Rotor | F-2415 |
| Listed fixed speed | 12,000–13,000 rpm, ±10% |
| Timer | Mechanical, 60 minutes |
| Brake | Manual switch |
GEMMY 2026 catalogue, page 9, KHT-400 column. The manufacturer specifies speed variation and approximate measurements; confirm the supplied configuration and operating instructions. Checked 2026-09-29.
Manufacturer reference document (opens in a new tab)
Confirm your configuration
Share the details you know so we can prepare a comparable, itemised offer.
- Intended application, sample/load and required working range
- Exact configuration, dimensions and compatible accessories/interfaces
- Site utilities, calibration/acceptance, training and service scope
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Clinical, training or facility application
- Required configuration, accessories and existing equipment
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about GEMMY Industrial equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Clinical Laboratory Equipment
- PB-3320
A binocular laboratory microscope with a measuring single tube inclined at 45 degrees and rotating through 360 degrees, with interpupillary distance adjustable from 48 mm to 75 mm. It is supplied with WF10X and WF16X eyepieces and a four position achromatic objective set of 4X, 10X, 40X and 100X. The double layer mechanical stage measures 140 x 130 mm with a 70 x 50 mm moving range, over an N.A. 1.25 Abbe condenser with iris diaphragm. Coaxial coarse and fine focusing runs on a rack and pinion mechanism with a fine focusing scale value of 0.002 mm, lit by a built-in 6V 20W variable brightness lamp. GEMMY publishes no product name for this model, only the model number PB-3320.
- KHT-410E haematocrit centrifuge
A micro haematocrit centrifuge for packed cell volume work, used in biochemistry, microbial immunity genetics, blood separation and general clinical testing to establish the percentage of red blood cells against whole blood, which can indicate anaemia or polycythaemia. GEMMY states that all models in the range run at a fixed 12000 rpm apart from the PLC-012 and PLC-012E. The time is set and the run started with the START button, the rotor lid must be closed before spinning, and a reading scale is supplied so the capillary tube can be read directly. EPDM is used for the rotor gasket to extend service life, and a safety device cuts the power if the lid is opened during operation.
- PB-3620 binocular microscope
A binocular microscope whose measuring single tube is inclined at 30 degrees rather than the 45 degrees of the rest of the PB range, rotating through 360 degrees with interpupillary distance from 48 mm to 75 mm. WF10X and WF16X eyepieces pair with achromatic objectives of 4X, 10X, 40X and 100X. The double layer mechanical stage measures 135 x 125 mm with a 70 x 50 mm moving range, over an N.A. 1.25 Abbe condenser with iris diaphragm. Focusing is coaxial coarse and fine on a rack and pinion mechanism with a fine focusing scale value of 0.002 mm, and illumination is a built-in 6V 20W variable brightness source.