LPSA: Laboratory Scale Pressure Swing Adsorption Unit
Brand: EDIBON | Category: Scientific & Laboratory Equipment
A laboratory plant for running adsorption tests by the pressure swing technique. A mixture can be synthesised from up to four gas feeds and then separated on the adsorbent bed, so students can study cycle time, purge ratio and product purity.
Technical Specifications
| Parameter | Value |
|---|---|
| Minimum Temperature range in adsorption | 25 °C to 50 °C |
| Maximum temperature in degassing | 200 °C |
| Maximum working pressure | 40 bar |
| Minimum working temperature range | 25 to 50 °C |
| Outer diameter | 12.7 mm |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Unit Operations Lab
- QALFC: Computer Controlled Fixed Bed Adsorption Unit
A fixed bed column for demonstrating gas adsorption. Students follow the movement of the mass transfer zone through the bed, record breakthrough curves and study how flow rate, concentration and bed depth change the adsorption capacity obtained.
- CAPC: Computer Controlled Wetted Wall Gas Absorption Column
A wetted wall column in which a thin liquid film flows down a tube in contact with a gas stream. The oxygen and deoxygenated water system is used, with a desorption column supplying the stripped water, so film mass transfer coefficients can be measured directly.
- QSAC: Computer Controlled Adsorptive Air Drying Unit
A damp air drying plant that removes moisture by adsorption, with transparent columns and continuous regeneration of the adsorbent. Two circuits allow one column to dry the air while the other is regenerated, which is how industrial dryers alternate in service.