MBF-1100TR Mossbauer Furnace with Temperature Controller TR-55
Brand: WissEl | Category: Nanotechnology
WissEl's instrument list gives MBF-1100TR as the MBF-1100 Mossbauer furnace supplied together with the TR-55 temperature controller. The furnace is built for Mossbauer effect measurements in vacuum or gas from room temperature upwards, around a quartz tube holding the sample holder and two inner heat screens, with kaolin cotton insulation and air cooling. Its construction allows the operating gas to be changed without taking the furnace apart or removing the sample, and the sample holder is made of steel with a high nickel content to resist aggressive gases at high temperature. The TR-55 adds a EUROTHERM 3216 control module with auto-tune, a pulse width controlled heater output and RS 232C remote control.
Selected manufacturer specifications
| Parameter | Value |
|---|---|
| Furnace sample-temperature range | Room temperature–1,000 °C; 1,100 °C for short periods |
| Furnace absorber diameter | 17 mm |
| Furnace housing | 100 mm diameter × 135 mm overall length |
| Furnace-body weight | Approximately 1.3 kg |
These are MBF-1100 furnace-body specifications in the manufacturer’s furnace documentation. The TR-55 controller and complete installed assembly are separate; 1,100 °C is a short-duration condition, not a continuous temperature rating. Checked 2026-09-29.
Confirm your configuration
Share the details you know so we can prepare a comparable, itemised offer.
- Sample type, measurement method and required spectral/time range
- Source/laser, detector, resolution, sample holder and optical interfaces
- Software, laser safety/site requirements, calibration and application training
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Materials, sample dimensions and process or measurement goal
- Required performance and existing instrument interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about WissEl equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Mossbauer Spectroscopy
- MDAS-1 Data Acquisition System with Combined Preamplifier and Main Amplifier
Complete counting and data acquisition chain for a Mossbauer spectrometer, built around a proportional counter and a combined preamplifier and main amplifier. The CMCA-550 module handles pulse height analysis and the MCS mode used to record Mossbauer spectra, and the set of cables to link the chain is included.
- MBC-1L Mossbauer Bath Cryostat
Bath cryostat for Mossbauer measurements, carried on WissEl's instrument list. The manufacturer publishes no separate data sheet page for this model, so no dimensions or temperature figures are quoted for it.
- MDAS-2 Data Acquisition System with Separate Main Amplifier
Data acquisition system in which the preamplifier and the main amplifier are separate units, giving more freedom in setting up the pulse chain. It combines the LND-45431 proportional counter with the PEA-6 preamplifier and AMP-1000 spectroscopy amplifier, feeding the CMCA-550 acquisition module.