MDFC: Coriolis Force Demonstration Unit
Brand: EDIBON | Category: Scientific & Laboratory Equipment
MDFC demonstrates the Coriolis effect on a rotating system. Water is fed through radial tubes on a rotating arm so the deflecting force acting on a mass moving in a rotating frame can be observed and measured. It is used in dynamics teaching.
Technical Specifications
| Parameter | Value |
|---|---|
| Dimensions | 650 x 610 x 750 mm approx |
| Weight | 30 Kg approx |
| Submersible pump. Range | 0 to 10 l/min. Operation range: 0 to 5 l/min |
| Motor with speed control. Speed range | 0 to 60 rpm |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Mechanics Lab
- MFCE: Centrifugal Force Unit
MFCE lets students measure the centrifugal force acting on rotating masses. Masses of different value are set at different radii on a driven rotor and the resulting force is read against speed, showing how force varies with mass, radius and angular velocity.
- MEMB2: Unit for studying Equilibrium of Moments on a Two Arm Lever
MEMB2 is a bench lever unit used to verify the principle of moments. Weights are hung at measured distances on both arms of a pivoted beam so students can balance clockwise and anticlockwise moments. It suits first year statics teaching.
- MIF: Inertia Flywheel Unit
MIF is used to determine the moment of inertia of a flywheel and to study angular acceleration. A falling mass on a cord drives the flywheel while fall time and drop height are recorded. It also allows bearing friction losses to be estimated.