SKE011-2 Treat-Waiting Chair
Brand: Saikang Medical | Category: Medical Equipment
A three-seat waiting-area bench with a continuous seat-and-backrest profile. Saikang lists overall dimensions of 1780 × 710 × 900 mm, with ±10 mm tolerance. Confirm the quoted seat dimensions, upholstery, armrests and installation arrangement; unclear depth units are excluded.
Selected manufacturer specifications
| Parameter | Value |
|---|---|
| Overall dimensions (3-seater) | 1780*710*900±10mm |
| Center distance | 570mm±10mm |
| Seat width | 520-565mm±10mm |
| Seat height from the ground | 420mm±10mm |
| Seat top height from ground | 900mm±10mm |
| Armrest top height from the ground | 595±10mm |
Selected values from Saikang's exact-model product page. Confirm the quoted configuration, accessories and current manufacturer documentation before procurement; listed tolerances and operating conditions apply. Checked 2026-09-29.
Confirm your configuration
Share the details you know so we can prepare a comparable, itemised offer.
- Use, load requirement and overall dimensions against the room or transfer route
- Castors/brakes, surfaces, storage and required attachments
- Cleaning compatibility, assembly, power/battery needs where applicable and service scope
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Clinical, training or facility application
- Required configuration, accessories and existing equipment
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Saikang Medical equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Ward Furniture
- SKE011-6 Treat-Waiting Chair
Dimensions follow the human body and the chair does not deform after long sitting. High-quality steel pipe forms the structure, with the surface treated in wear-resistant electrostatic epoxy powder coating, while the armrest surfaces are injection moulded from high-quality polypropylene (PP), which feels more humanised and avoids the cold touch of bare metal. The wavy water-patterned backrest fits the curve of the body and relieves pressure across it. Materials are closely bonded and keep their elasticity, so there is no deformation, wrinkling, cracking or breaking even with frequent use.
- SKE011-1 Treat-Waiting Chair
The backrest is shaped in wave-like water ripples that follow the curves of the body and relieve overall pressure. Around it the design stays simple and ergonomic, resisting deformation after long periods of sitting. Regular colours from the PU colour card are optional.
- Comfort-T1
Comfort-T1 is a mobile, height-adjustable patient table built for therapeutic and medical settings and intended as a bed-side table for all types of chairs. It suits dining, reading or intravenous therapy during a treatment session, and its low chassis slides under most treatment chairs. A hand lever sets height anywhere from 72,5 to 98 cm, the larger tray tilts through 0, 15 and 30 degrees while the smaller stays horizontal for drinks, and both plastic trays lift out for cleaning. The unit weighs 15 kg and takes a 15 kg maximum load, running on castors with individual brakes.