YCW-012S shaking water bath
Brand: GEMMY Industrial | Category: Medical Equipment
A reciprocating shaking water bath built on a microprocessor digital controller that displays the actual bath temperature and holds uniformity to +/-0.1 degrees C. Shaking stroke is set on a control knob from 20 to 200 rpm, produced by an induction motor giving a 20 mm circular motion at 0 dB. Tube racks and the flask platform can be raised, lowered and removed to suit different vessel lengths, or taken off entirely when shaking is not wanted. An audible over temperature alarm cuts the power at 2 degrees C above the set point, and temperature recalibration is available when the actual reading drifts from the display.
Technical Specifications
| Parameter | Value |
|---|---|
| Tank Capacity | 22L Approx. |
| Working Capacity | 17.5L Approx. |
| Overall Dimension | 74 x 33.5 x 36 cm Approx. |
| Chamber Dimension | 50 x 30 x 15 cm Approx. |
| Wattage Consumption | 1KW (Heater) + 25W (Motor) |
| Temp Redout | LED Digital |
| Timer | Digital 99 hr 59 min + HOLD |
| Shaking Speed | 20 ~ 200 RPM Adjustable |
| Temp Control | Microprocessor, PID |
| Temp Sensor | PT-100 |
| Temp Range | Ambient to 99.9°C, Adjustable |
| Temp Stability | ± 0.05°C at 37°C |
| Temp Accuracy | ± 0.1°C |
| Temp Uniformity | ± 0.1°C |
| Temp Resolution | 0.1°C |
| Overheat Cutoff | Yes, 2°C to the Set Point |
| Low Water Protection | Yes, Alarm and Shutoff |
| Shaking Stroke | 20 mm Reciprocal Per Cycle |
Published manufacturer data for the listed model or variants. Confirm the exact configuration, accessories and test conditions in the quotation. Checked 2026-09-29.
Manufacturer reference document (opens in a new tab)
Confirm your configuration
Share the details you know so we can prepare a comparable, itemised offer.
- Working temperature range, usable capacity and intended load
- Uniformity/stability requirements and required circulation/agitation
- Utilities, racks/blocks/accessories, calibration and acceptance checks
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Clinical, training or facility application
- Required configuration, accessories and existing equipment
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about GEMMY Industrial equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Clinical Laboratory Equipment
- YCW-010 water bath
A digitally set thermostatic water bath offered in 22 litre and 11 litre tanks, working from 5 degrees C above ambient to 100 degrees C with PID control and a maximum setting of 99.9 degrees C. Stability and uniformity are both quoted at +/-0.01 degrees C, held by a rotating stirrer that directs flow around the tank. The moulded bath has rounded corners and seamless stainless steel sides, and the immersion heating element is sheathed in stainless steel and rated at 1.0 kW. Audible and visible alarms cut the power at 2 degrees C above the set point. Concentric ring covers, a drain valve and a perforated tray are offered as options.
- DBC-9 manual differential blood counter
An eight unit manual differential blood counter with a totaliser, for simplifying differential blood cell counts at the haematology bench. The eight keys represent the normal Schilling groups of leucocytes and each carries the name and picture of the cell it records. Each stroke registers both in the unit corresponding to the key pressed and in the window, and a bell rings at every 100 cells counted. Figures are cleared by rotating the handle anti-clockwise.
- YCW-010E water bath
The timed version of GEMMY's digital thermostatic bath, in 22 litre and 11 litre tanks, with digital setting, LED digital readout and PID control to a maximum of 99.9 degrees C. Stability and uniformity are both listed at +/-0.01 degrees C and the sheathed immersion heater is rated at 1.0 kW. The timer only begins once the set temperature has stabilised, and the display shows END when the cycle finishes. Audible and visible alarms shut out power at 2 degrees C above the set point, and a drain valve and perforated tray are available as extras.