YCW-03S water bath
Brand: GEMMY Industrial | Category: Medical Equipment
A 22 litre thermostatic bath set by thumb switch with three preset points at 25, 37 and 56 degrees C, the temperatures a serology and haematology bench uses most. Readout is LED digital, control is PID, and stability is quoted at +/-0.05 degrees C with uniformity at +/-0.01 degrees C to a maximum of 100 degrees C. A temperature recalibration function corrects drift between the actual and displayed value. GEMMY offers stainless steel gable lids, concentric ring covers with openings of 107, 80, 55, 31.5 and 21 mm, and mesh tube racks for 13 mm or 18 mm tubes in 40 or 20 wells.
The current GEMMY catalogue could not be matched to a complete specification table for this exact model. Confirm the ordering code, availability and current datasheet before comparing ratings; specifications of a similar model or a different suffix are not interchangeable. Checked 2026-09-29.
Manufacturer reference document (opens in a new tab)
Confirm your configuration
Share the details you know so we can prepare a comparable, itemised offer.
- Working temperature range, usable capacity and intended load
- Uniformity/stability requirements and required circulation/agitation
- Utilities, racks/blocks/accessories, calibration and acceptance checks
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Clinical, training or facility application
- Required configuration, accessories and existing equipment
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about GEMMY Industrial equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Clinical Laboratory Equipment
- YCW-05 water bath
The small bath in GEMMY's constant temperature range, a 5 litre analogue unit with a thermometer readout and a stainless steel sheathed immersion heating element. It works from 5 degrees C above ambient up to 100 degrees C for biological, clinical research, medical, biochemical, industrial and teaching laboratories. The moulded tank has rounded corners and seamless stainless steel sides for even circulation and easy cleaning, and a rotating stirrer directs flow around the tank to improve uniformity. Concentric ring covers are offered to cut heat loss when flasks are suspended in the bath.
- YCW-010E water bath
The timed version of GEMMY's digital thermostatic bath, in 22 litre and 11 litre tanks, with digital setting, LED digital readout and PID control to a maximum of 99.9 degrees C. Stability and uniformity are both listed at +/-0.01 degrees C and the sheathed immersion heater is rated at 1.0 kW. The timer only begins once the set temperature has stabilised, and the display shows END when the cycle finishes. Audible and visible alarms shut out power at 2 degrees C above the set point, and a drain valve and perforated tray are available as extras.
- KHT-410E haematocrit centrifuge
A micro haematocrit centrifuge for packed cell volume work, used in biochemistry, microbial immunity genetics, blood separation and general clinical testing to establish the percentage of red blood cells against whole blood, which can indicate anaemia or polycythaemia. GEMMY states that all models in the range run at a fixed 12000 rpm apart from the PLC-012 and PLC-012E. The time is set and the run started with the START button, the rotor lid must be closed before spinning, and a reading scale is supplied so the capillary tube can be read directly. EPDM is used for the rotor gasket to extend service life, and a safety device cuts the power if the lid is opened during operation.