21mm Aluminium Attenuator
Brand: Leeds Test Objects | Category: Nuclear Medicine & Imaging
A patient equivalent aluminium attenuator plate for image quality checks on general radiography systems, built to the IEC beam quality standards. The integral mounting plate lets it drop straight into common accessory rails without adding material to the beam.
Technical Specifications
| Parameter | Value |
|---|---|
| Plate | 152.4 x 152.4 mm (6 in x 6 in), 19 mm thick |
| Specification | Permanently attached 2 mm thick aluminium mounting plate |
| Mounting plate dimensions | 168 x 175 mm |
| Specification | Supplied with 4 socket head screws for fastening an optional extra copper filter for use at 100 kV |
| Conforms to IEC 62220-1-1 and IEC 61267 | 2005 |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Department workflow and intended equipment use
- Required configuration and existing system interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Leeds Test Objects equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Nuclear Medicine & Imaging
More from Radiology & Radiotherapy QA Phantoms
- 25mm Aluminium Attenuator
A patient equivalent aluminium attenuator plate for image quality checks on general radiography systems. A permanently attached thin mounting plate means no extra material sits in the beam when the plate is fitted to the accessory rails.
- T1 T2 EUROSPIN Gels
A set of eighteen gel filled tubes with calibrated T1 and T2 values, sized to drop into the MagIQ EUROSPIN TO5 and into the contrast sections of the MagIQ Solo and MagIQ Duo phantoms. They are used to check relaxation time measurement accuracy.
- CBCT-150
A PMMA cuboid phantom for constancy testing of cone beam CT and 3D fluoroscopy systems to DIN 6868-150. Rows of small air holes of decreasing diameter give a direct measure of spatial resolution, and a tripod allows universal positioning.