CBCT-150
Brand: Leeds Test Objects | Category: Nuclear Medicine & Imaging
A PMMA cuboid phantom for constancy testing of cone beam CT and 3D fluoroscopy systems to DIN 6868-150. Rows of small air holes of decreasing diameter give a direct measure of spatial resolution, and a tripod allows universal positioning.
Technical Specifications
| Parameter | Value |
|---|---|
| Specification | PMMA cuboid 120 x 120 x 60 mm |
| Specification | Rows of 4 air holes of 1.3, 1.0, 0.90, 0.90, 0.90, 0.60 and 0.50 mm diameter |
| Specification | Spatial frequencies 0.38, 0.50, 0.56, 0.63, 0.71, 0.83 and 1.0 mm respectively |
| Specification | Tripod for universal positioning |
| Specification | Conforms to DIN 6868-150 |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Department workflow and intended equipment use
- Required configuration and existing system interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Leeds Test Objects equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Nuclear Medicine & Imaging
More from Radiology & Radiotherapy QA Phantoms
- CRDDR Set
A set of test objects for annual and commissioning checks on computed radiography and direct digital radiography systems. It covers erasure cycle efficiency, image retention, sensitivity index consistency, uniformity, scaling errors, artefacts, limiting resolution and threshold contrast detail detectability.
- 25mm Aluminium Attenuator
A patient equivalent aluminium attenuator plate for image quality checks on general radiography systems. A permanently attached thin mounting plate means no extra material sits in the beam when the plate is fitted to the accessory rails.
- DR-2
A set of test objects for routine image quality checks on digital radiography systems. It brings together a threshold contrast object, a geometry object, a mesh object and an MTF edge with free software.