Digital Dissolution Tester DT 9510 Series (DT 9512, DT 9513, DT 9514)
Brand: Erweka | Category: Scientific & Laboratory Equipment
Erweka describe the DT 9510 series as the big brother of the DT 950. It is driven by the same integrated PC, and its up to 14 test stations run from a single powerful motor while the large water bath holds temperature steady through the thermal inertia of the water. That allows two batches of samples to be tested in parallel under exactly the same conditions, 100 % USP / EP compliant. The optional AirLift system raises and lowers the dissolution head at the press of two buttons, with a two hand safety arrangement that stops the movement as soon as either button is released. TestAssist and automatic tablet drop are carried over from the smaller model.
Technical Specifications
| Parameter | Value |
|---|---|
| Weight | 110 kg |
| Dimensions (H x W x D) | 850 x 1062 x 650 mm |
| Voltage | 115/230 V; 50/60 Hz |
| Speed | 20-250 U/min |
| Vessel volume | 400 ml / 1000 ml / 2000 ml |
| Interfaces | 1x RS-232, 2x USB, 2x Ethernet/RJ45 |
| Test stations (DT 9512) | 12 in 2 rows |
| Test stations (DT 9513) | 13 in 2 rows |
| Test stations (DT 9514) | 14 in 2 rows |
| USP methods | USP 1 / USP 2 / USP 5 / USP 6 |
| Fuses | 2 A |
| Protection class | I/EN 61140 |
| Protection type | IP 21/IEC 529 |
| Operation | Touchscreen 7", 800x480 Pixel |
| Sampling positions | High-head / Low-head / Cleaning mode |
| Ambient temperature during operation | +10 °C to +30 °C (ambient temperature min. -5 °C below set temperature) |
| Storage & Transport temp. | +5 °C to +40 °C |
| Relative humidity | 25-80 % non condensing |
Published manufacturer data for the listed model or variants. Confirm the exact configuration, accessories and test conditions in the quotation. Checked 2026-09-29.
Confirm your configuration
Share the details you know so we can prepare a comparable, itemised offer.
- Test method, dosage form and required throughput
- Exact model configuration, measuring range and method-specific accessories
- Data handling, qualification/calibration documents and operator training
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Erweka equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Laboratory Instruments
- Dissolution Tester DT Light Series (DT 126 Light, DT 128 Light)
The DT Light series packages proven Erweka quality for a small budget, covering simple dissolution tests to USP methods 1, 2, 5 and 6. Units carry 6 or 8 test stations and a fixed high head drive that keeps each 1000 ml vessel easy to reach. Shafts change over quickly and the one piece moulded PET water bath uses the established Erweka water outlet for straightforward cleaning, while an external flow through heater reduces the influence of vibration and holds a stable temperature. Every accessory that touches the dissolution sample is fitted in Germany, so the series carries Erweka's Made in Germany quality.
- Digital Dissolution Tester DT 950 Series (DT 956, DT 957, DT 958)
Erweka's DT 950 is an advanced digital dissolution tester built on embedded PC technology, with a 7 inch touch display, an intuitive user interface and a fully integrated Audit Trail for 21 CFR Part 11 compliance. TestAssist guides the operator step by step through test configuration so only compliant parameters are entered for USP / EP / JP conform dissolution testing. Method Management allows methods to be created, edited and approved, User Management handles access control and rights, and data export to FTP servers gives LIMS connectivity. The system can be upgraded from 6 to 8 test stations, fitted with automatic tablet drop or temperature sensors for each vessel, and switched between low head and high head modes.
- Dissolution Tester BioDis RRT 10 (USP 3 / USP 7)
The RRT 10 automates dissolution testing for extended and sustained release dosage forms and is suited to simulating the pH changes within the human body. Placing a different medium in each row lets the instrument mirror varying gastrointestinal conditions in vivo, and automatic sample transport between rows supports reliable release testing across different pH zones. Erweka supply it as a USP method 3 device, a USP method 7 device, or a combination of both, with an external flow through heater that minimises vibration and a detachable touch display. Vessels sit in an acrylic water bath with an outlet valve for cleaning, and an automatic cover system reduces evaporation of the media.