EECC: Computer Controlled Corrosion Study Unit
Brand: EDIBON | Category: Scientific & Laboratory Equipment
A unit that runs up to eight corrosion cells at the same time, each holding a test specimen mounted so that unwanted secondary effects are avoided. It is used to compare corrosion rates for different metals, electrolytes and protection methods.
Technical Specifications
| Parameter | Value |
|---|---|
| Air flowmeter, range | 1 to 7.5 l/min |
| Gas flowmeter, range | 1 to 7.5 l/min |
| Dimensions | 1200 x 450 x 400 mm approx |
| Weight | 50 kg approx |
| Electrical supply | single-phase 200 VAC to 240 VAC/50 Hz or 110 VAC to 127 VAC/60 Hz |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Unit Operations Lab
- EIIC: Computer Controlled Ion Exchange Unit
A self contained unit with two transparent columns to be filled with anionic and cationic resins, plus a spare column and a controlled feed pump. Students follow demineralisation, measure breakthrough by conductivity and carry out resin regeneration.
- TTLFC: Computer Controlled Fluidization and Fluid Bed Heat Transfer Unit
A unit that gives visual and quantitative results for air flowing through a packed bed and then a fluidised bed of granular material. A heated probe allows bed to surface heat transfer coefficients to be measured as the bed passes from fixed to fluidised.
- QMS: Solids Handling Study Unit
A bench that introduces the handling of bulk solids, covering size reduction, mixing, transport, discharge and weighing. It gives students practical work on hopper flow, conveying and particle size analysis, which are often missing from a chemical engineering course.