TTLFC: Computer Controlled Fluidization and Fluid Bed Heat Transfer Unit
Brand: EDIBON | Category: Scientific & Laboratory Equipment
A unit that gives visual and quantitative results for air flowing through a packed bed and then a fluidised bed of granular material. A heated probe allows bed to surface heat transfer coefficients to be measured as the bed passes from fixed to fluidised.
Technical Specifications
| Parameter | Value |
|---|---|
| Maximum power | 150 W |
| Specification | Pressure regulator and filter. It is supplied fixed to 3 Bar |
| Dimensions | 700 x 600 x 800 mm approx |
| Weight | 50 Kg approx |
| Electrical supply | single-phase 200 VAC to 240 VAC/50 Hz or 110 VAC to 127 VAC/60 Hz |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Unit Operations Lab
- EECC: Computer Controlled Corrosion Study Unit
A unit that runs up to eight corrosion cells at the same time, each holding a test specimen mounted so that unwanted secondary effects are avoided. It is used to compare corrosion rates for different metals, electrolytes and protection methods.
- LFFC: Computer Controlled Fixed and Fluidized Bed Unit
A unit with two transparent columns, one for air and one for water, so flow through a particle bed can be studied in both fluids at once. Students measure pressure drop across fixed and fluidised beds, find the minimum fluidisation velocity and check the Carman Kozeny equation.
- EIIC: Computer Controlled Ion Exchange Unit
A self contained unit with two transparent columns to be filled with anionic and cationic resins, plus a spare column and a controlled feed pump. Students follow demineralisation, measure breakthrough by conductivity and carry out resin regeneration.