LFFC: Computer Controlled Fixed and Fluidized Bed Unit
Brand: EDIBON | Category: Scientific & Laboratory Equipment
A unit with two transparent columns, one for air and one for water, so flow through a particle bed can be studied in both fluids at once. Students measure pressure drop across fixed and fluidised beds, find the minimum fluidisation velocity and check the Carman Kozeny equation.
Technical Specifications
| Parameter | Value |
|---|---|
| Diameter | 50 mm |
| Water flow sensor, range | 0.1 to 2.5 l/min |
| Air flow sensor, range | 0 to 20 l/min |
| Height | 550 mm |
| Electrical supply | single-phase 200 VAC to 240 VAC/50 Hz or 110 VAC to 127 VAC/60 Hz |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Unit Operations Lab
- TTLFC: Computer Controlled Fluidization and Fluid Bed Heat Transfer Unit
A unit that gives visual and quantitative results for air flowing through a packed bed and then a fluidised bed of granular material. A heated probe allows bed to surface heat transfer coefficients to be measured as the bed passes from fixed to fluidised.
- PFTC: Computer Controlled Drum Cell Filter
A rotary drum filter for studying the continuous filtration of liquids carrying suspended solids. The drum, vacuum system and scraper can be watched in operation, and students measure filtrate rate and cake moisture against drum speed and submergence.
- EECC: Computer Controlled Corrosion Study Unit
A unit that runs up to eight corrosion cells at the same time, each holding a test specimen mounted so that unwanted secondary effects are avoided. It is used to compare corrosion rates for different metals, electrolytes and protection methods.