EEU/20KN: Universal Material Testing Unit
Brand: EDIBON | Category: Scientific & Laboratory Equipment
EEU/20KN is a bench universal testing machine for tensile, compression and bending tests on small specimens. Load and extension are recorded during the test so the stress strain curve, yield point, tensile strength and elongation can be obtained.
Technical Specifications
| Parameter | Value |
|---|---|
| Dimensions | 550 x 500 x 800 mm approx |
| Weight | 60 Kg approx |
| Maximum stroke | 45 mm |
| Dynamometer | 0 to 20 kN. Graduations: 0.5 kN |
| Elongation gauge | 0 to 10 mm. Graduations: 0.01 mm |
| Deformation displacement sensor, range | 0 to 50 mm |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Materials Testing Lab
- EEDB: Brinell Hardness Testing Unit
EEDB is a bench hardness tester that uses the Brinell method. A hardened ball indenter is pressed into the specimen under a known load and the diameter of the impression is measured optically to give the Brinell hardness number.
- Qness 250 / 750 / 3000 A+ EVO: Fully Automated Macro Hardness Tester
Fully automated macro hardness testers with three axis control, so specimens of differing test height can be measured in one run without refixturing. A Jominy sample holder with test module is available as an option for end quench hardenability testing.
- EBVR: Brinell, Vickers & Rockwell Hardness Testing Unit
EBVR is a bench hardness tester covering the Brinell, Vickers and Rockwell methods on one machine. Indenters and loads are changed for each scale so students can compare hardness values obtained by different methods on the same material.