Brand: EDIBON | Category: Scientific & Laboratory Equipment

A deep bed filter that removes suspended solids from raw water as it passes down through a granular medium. Students follow head loss with time, measure filtrate quality and carry out backwashing, which covers the core rapid gravity filtration experiments.
| Parameter | Value |
|---|---|
| Total capacity | 700 l |
| Thirty pressure sensors, range | 0 to 30 psi |
| Flow sensor, range | 2 to 150 l/min; accuracy: ± 2 % |
| Dimensions | 1600 x 1500 x 2500 mm approx |
| Weight | 250 kg approx |
| Electrical supply | single-phase 200 VAC to 240 VAC/50 Hz or 110 VAC to 127 VAC/60 Hz |
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
A membrane unit that performs tangential flow filtration by both reverse osmosis and ultrafiltration. Two variable speed pumps set the feed conditions, so students can measure permeate flux and rejection against pressure, cross flow velocity and feed concentration.
A trickling filter unit in which wastewater is distributed over a packed medium carrying an attached biofilm. It is used to study fixed film treatment, including hydraulic and organic loading, recirculation and the removal achieved across the filter depth.
An adsorption unit with two activated carbon columns that can be operated in series or in parallel. It reproduces the behaviour of adsorption in physico-chemical water treatment, allowing breakthrough curves and bed exhaustion to be measured under different flow rates.