Brand: EDIBON | Category: Scientific & Laboratory Equipment

A rising film evaporator used to concentrate a non-volatile solute by evaporating water from the feed. The design suits heat sensitive products because contact time is short, and students can measure evaporation capacity, steam economy and product concentration.
| Parameter | Value |
|---|---|
| Three tanks, capacity | 10 l (for feeding, concentrated and evaporated) |
| Flow sensor, range | 0.2 to 6.5 l/min |
| Two pressure sensors, range | 0 to 2 bar |
| Specification | Single effect vacuum pump, computer controlled, maximum flow 3 m³/h and maximum vacuum |
| Specification | Coil coolant with length of 400 mm |
| Electrical supply | single-phase 200 VAC to 240 VAC/50 Hz or 110 VAC to 127 VAC/60 Hz |
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
A falling film evaporator in which the feed flows down the inside of a heated tube as a thin film. It gives high heat transfer coefficients at low temperature difference, so students can compare its performance with rising film operation on the same duty.
A freeze dryer that carries out lyophilisation inside a transparent chamber, with control of chamber pressure and of the heated trays. Students follow the freezing, primary drying and secondary drying stages and measure the moisture removed from the product.
A two effect evaporator with single glass tube evaporators that can be run in series, in parallel or as a true double effect. It lets students measure the steam economy gained by reusing vapour from the first effect to heat the second.