BLIO: Freeze Dryer
Brand: EDIBON | Category: Scientific & Laboratory Equipment
A freeze dryer that carries out lyophilisation inside a transparent chamber, with control of chamber pressure and of the heated trays. Students follow the freezing, primary drying and secondary drying stages and measure the moisture removed from the product.
Technical Specifications
| Parameter | Value |
|---|---|
| Diameter of the trays | 200 mm |
| Maximum capacity of the condenser | 6 kg |
| Condenser final temperature | - 55 °C |
| Total electrical power | 1400 W |
| Electrical supply | single-phase 200 VAC to 240 VAC/50 Hz or 110 VAC to 127 VAC/60 Hz |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Unit Operations Lab
- EPAC: Computer Controlled Rising Film Evaporator
A rising film evaporator used to concentrate a non-volatile solute by evaporating water from the feed. The design suits heat sensitive products because contact time is short, and students can measure evaporation capacity, steam economy and product concentration.
- SDCC: Computer Controlled Spray Dryer and Chiller Unit
A unit that combines spray drying and spray chilling in one chamber, so liquids can be turned into powders either by evaporating the solvent or by solidifying a melt. It allows the two operating modes to be compared on the same feed material.
- EPDC/C: Computer Controlled Falling Film Evaporator
A falling film evaporator in which the feed flows down the inside of a heated tube as a thin film. It gives high heat transfer coefficients at low temperature difference, so students can compare its performance with rising film operation on the same duty.