Jandel Very Close Spacing probe
Brand: Jandel Engineering | Category: Nanotechnology
The very close spacing probe has 0.5 mm needle spacing for measurements taken close to the edge of a sample or on very small samples. The finer needles it uses call for more careful handling than a standard spacing probe.
Technical Specifications
| Parameter | Value |
|---|---|
| Needle spacing | 0.500 mm |
| Needle diameter for 0.635 mm or 0.500 mm spacing probes | 0.3 mm |
| Specification | Upper and lower jewelled needle guides |
| Specification | Radii, spacing and planarity verified by video inspection system and optical interferometer |
| Specification | Loads verified by electronic force gauge |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Materials, sample dimensions and process or measurement goal
- Required performance and existing instrument interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Jandel Engineering equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Electrical & Electrochemical Characterisation
- Jandel Macor four point probe
The Macor probe is built for high and low temperature measurement. In an oven it works from about 80 K to 600 K, and if only the sample is heated it can be used up to 1000 K, though prolonged contact should be avoided. It is not jewel guided.
- KLA-Tencor-Prometrix
This cartridge with a 6 way connector is made to suit KLA, Tencor and Prometrix systems such as the RS55, RS75 and RS100. It looks similar to the CDE head but the two are not interchangeable, so care is needed where both tools are on site.
- Jandel High Vacuum four point probe
This version of the cylindrical probe is prepared for vacuum service. It is unanodised, blind holes are removed where possible, connections are crimped rather than soldered and a ruby ball is used for the insulation pad.