Brand: ThorLabs | Category: Scientific & Laboratory Equipment

General purpose broadband mirrors with an aluminium coating under a silicon dioxide protective layer. They tarnish less readily than protected silver in humid conditions, which makes them a practical teaching laboratory mirror.
| Parameter | Value |
|---|---|
| Average reflectance | greater than 90% from 450 nm to 2 micrometres |
| Average reflectance | greater than 95% from 2 to 20 micrometres |
| Surface flatness | lambda/10, lambda/8 for the 2" x 2" square |
| Surface quality | 40-20 scratch-dig |
| Specification | Round and square versions stocked, packs of ten round mirrors available |
| Specification | 19 mm diameter version designed to fit Polaris fixed optic mounts |
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about ThorLabs equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
Dielectric coated mirrors on fused silica substrates that reflect more than 99% for both polarisations over four broad bands. They are designed for continuous wave and nanosecond lasers at angles of incidence from 0 to 45 degrees.
Gold coated mirrors with a protective dielectric overcoat, intended for infrared work where reflectance must stay high well beyond 2 micrometres. Reflectance is relatively insensitive to angle of incidence, as with other metallic coatings.
Diamond turned off-axis parabolas that focus a collimated beam or collimate a point source without spherical or chromatic aberration. The off-axis geometry moves the focus clear of the beam path, which is useful for spectroscopy and ultrafast work.