TFEC: Computer Controlled Flow Boiling Demonstration Unit
Brand: EDIBON | Category: Scientific & Laboratory Equipment
A demonstration unit built around two concentric glass tubes carrying a refrigerant and a heating fluid in cross flow. It allows the flow boiling regimes inside a tube to be seen and measured, which supports teaching on evaporators and two phase flow.
Technical Specifications
| Parameter | Value |
|---|---|
| External diameter | 100 mm |
| Internal diameter | 90 mm |
| Specification | Absolute pressure sensor from -1 to 1.6 bar |
| Length | 300 mm |
| Electrical supply | single-phase 200 VAC to 240 VAC/50 Hz or 110 VAC to 127 VAC/60 Hz |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Unit Operations Lab
- QUCC: Computer Controlled Crystallization Unit
A unit for the study of cooling crystallisation, aimed at substances whose solubility changes with temperature. Students control the cooling profile and agitation and examine how they affect nucleation, crystal growth and the size distribution of the product.
- TCEC: Computer Controlled Boiling Heat Transfer Unit
A unit in which a heating element mounted horizontally inside a glass chamber boils a refrigerant, so the boiling curve can be traced. Students observe convective, nucleate and film boiling, locate the critical heat flux and measure condensation on the cooling coil.
- QUCC/A: Computer Controlled Advanced Crystallization Unit
An advanced cooling crystallisation unit that allows the industrial mass transfer operation to be seen and measured in more detail than the basic model. It supports work on supersaturation, seeding, residence time and the recovery of the crystalline product.