CAL L92
Brand: Linseis | Category: Nanotechnology
The CAL L92 is a differential temperature scanning microcalorimeter that measures the heat taken up or released by a sample as its temperature is changed. Its sensitivity suits all types of materials, including very dilute solutions. It runs from -60 °C to 170 °C at 0.001 to 5 °C/min.
Technical Specifications
| Parameter | Value |
|---|---|
| Temperature range | -60 °C to 170 °C |
| Scan rates | 0.001 to 5 °C/min |
| Measurement range | ±150 mW |
| Temperature regulation precision | 100 µ°C |
| RMS noise | 0.05 μW |
| Measurement time | 30 to 60 min per experiment |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Materials, sample dimensions and process or measurement goal
- Required performance and existing instrument interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Linseis equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Thermal Analysis & Thermophysical Measurement
- L40 EGA QMS
The L40 EGA QMS couples a Linseis thermobalance to a Pfeiffer or MKS quadrupole mass spectrometer for evolved gas analysis. Gases released from the sample during heating are drawn off through a heated adapter and capillary and identified by mass. It is used to link each mass loss step to the species given off.
- IBC L91
The IBC L91 is an isothermal battery calorimeter that measures the heat given off by a battery cell or module during operation. Heat flow is resolved across the measuring plate by an array of sensors, down to a calorimetric resolution of 0.1 mW. It is used in battery development and safety testing.
- L40 EGA FTIR
The L40 EGA FTIR couples a Linseis STA L81 thermobalance to a Nicolet FTIR spectrometer for evolved gas analysis. Gases released from the sample during heating pass along a temperature controlled transfer line and are identified by their infrared absorption bands. It is used to assign mass loss steps to species.