Brand: CH Instruments | Category: Nanotechnology
The CHI680D amp booster extends current measurement to 2 A and stacks with the host instrument. It also allows low current measurement, though a Faraday cage may be needed above 50 mV per second. Cell control signals for purge, knock and stir are disabled while the booster is connected.
| Parameter | Value |
|---|---|
| Specification | Current can be measured up to 2 A |
| Specification | Compatible with the model 600D/E/F instrument series |
| Specification | Works with the model 700D/E/F series on the primary channel only |
| Dimensions | 12.5 in W x 11 in D x 4.75 in H |
| Weight | 17 lb |
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about CH Instruments equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
The CHI684 is a multi channel multiplexer that switches the working, sensing, reference and counter lines between cells so a sequence of experiments can be run unattended. Channels are chosen from the Control menu or by macro command, and data is saved to file after each run.
The CHI200(B) is a picoamp booster and Faraday cage that lets current down to a few picoamperes be measured. It places the preamplifier close to the electrode for lower bias current and noise, and the cage also suppresses mains frequency interference. Detection and switching are automatic.
The stability shroud is a removable push fit collar for the probe head. Jandel advises against handling probe heads by hand because the tungsten carbide needles are thin, and the shroud is offered where handling cannot be avoided.