FPCC: Computer Controlled Unit to Study Flow through Packed Columns
Brand: EDIBON | Category: Scientific & Laboratory Equipment
A transparent packed column that can be run with water, air or both together to simulate an absorption column. It is used to measure pressure drop against gas and liquid rates, to observe loading and flooding and to compare different packing materials.
Technical Specifications
| Parameter | Value |
|---|---|
| Inner diameter | 80 mm |
| Water storage tank, capacity | 60 l |
| Flow | 18 l./min |
| Max. volumetric flow | 8 m³/h |
| Max. pressure | 1 bar rel |
| Electrical supply | single-phase 200 VAC to 240 VAC/50 Hz or 110 VAC to 127 VAC/60 Hz |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Unit Operations Lab
- TCEC: Computer Controlled Boiling Heat Transfer Unit
A unit in which a heating element mounted horizontally inside a glass chamber boils a refrigerant, so the boiling curve can be traced. Students observe convective, nucleate and film boiling, locate the critical heat flux and measure condensation on the cooling coil.
- QSAC: Computer Controlled Adsorptive Air Drying Unit
A damp air drying plant that removes moisture by adsorption, with transparent columns and continuous regeneration of the adsorbent. Two circuits allow one column to dry the air while the other is regenerated, which is how industrial dryers alternate in service.
- TFEC: Computer Controlled Flow Boiling Demonstration Unit
A demonstration unit built around two concentric glass tubes carrying a refrigerant and a heating fluid in cross flow. It allows the flow boiling regimes inside a tube to be seen and measured, which supports teaching on evaporators and two phase flow.