Kiralux Polarization Cameras, 5.0 MP Monochrome CMOS
Brand: ThorLabs | Category: Scientific & Laboratory Equipment
Monochrome cameras with a four-direction wire grid polariser array built onto the sensor between the microlenses and the photodiodes. A single exposure yields intensity, azimuth and degree of linear polarisation images for stress and flaw inspection.
Technical Specifications
| Parameter | Value |
|---|---|
| Sensor | 2448 x 2048 pixels, 3.45 micrometre pixels, 2/3 inch format |
| Specification | On-chip wire grid polariser array at 0, 45, -45 and 90 degrees |
| Read noise | less than 2.5 electrons RMS |
| Peak quantum efficiency | 72% typical from 525 nm to 580 nm |
| Maximum frame rate | 35 fps at full sensor; dynamic range up to 71 dB |
| ADC resolution | 12 bits; C-Mount (1.000"-32) lens mount |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about ThorLabs equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Photodetectors & Beam Diagnostics
- LaserCam HR II
LaserCam HR II is a camera based beam profiler that records the spatial intensity distribution and size of a laser beam. It measures pulsed and continuous wave beams from 0.5 mm to 6 mm across, with ultraviolet and visible to near infrared versions.
- Quantalux 2.1 MP sCMOS Scientific Cameras
Monochrome scientific CMOS cameras built for low light imaging, combining sub-electron median read noise with high dynamic range. They are used for fluorescence microscopy, quantum dot imaging and multispectral work, in passively or actively cooled packages.
- BeamMaster-USB System
BeamMaster-USB is a scanning multiple knife-edge beam profiler for continuous wave lasers. Its large dynamic range lets it measure small diameter and focused beams from 3 um to 8 mm across a wavelength range of 190 nm to 1800 nm.