MBBC-N20106 Mossbauer N2 Bath Cryostat
Brand: WissEl | Category: Nanotechnology
A liquid nitrogen top loading bath cryostat for Mossbauer spectroscopy with the source at ambient temperature. The stainless steel body and low consumption give long stand times, and samples can be exchanged in cold condition.
Technical Specifications
| Parameter | Value |
|---|---|
| Temperature range | 56 K by pumping off nitrogen gas, up to 330 K |
| Temperature stability | equal to or better than 0.3 K |
| Temperature gradient | equal to or smaller than 0.3 K |
| Liquid nitrogen volume | 18 l |
| Liquid nitrogen stand time | 15 days unheated at liquid nitrogen temperature |
| Mossbauer absorber diameter | 20 mm, mylar windows, copper sample holder |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Materials, sample dimensions and process or measurement goal
- Required performance and existing instrument interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about WissEl equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Mossbauer Spectroscopy
- TR-50 Temperature Controller
A temperature controller for the WissEl Mossbauer bath cryostats. It reads a DT-670 silicon diode inside the cryostat through a four wire connection and drives the cryostat heater from a built-in Eurotherm 3216 control module.
- MBBC-HE0106 Mossbauer He/N2 Bath Cryostat
A top loading stainless steel bath cryostat for low temperature Mossbauer spectroscopy with the source at ambient temperature. It runs on liquid helium or liquid nitrogen and allows the sample to be changed while cold.
- MBF-1100 Mossbauer Furnace
A furnace for Mossbauer effect measurements in vacuum or gas from room temperature upwards. A quartz tube holds the sample holder and inner heat screens, and two pipe connections allow evacuation, gas filling or a continuous gas flow without dismantling the furnace.