MCS8 Manual Coating and Developing System
Brand: SUSS MicroTec | Category: Nanotechnology
A modular manual coating and aqueous developing platform for start-ups, research groups and low volume production. Frames build up from a single module to twelve, mixing spin coating, spray coating, baking and developing on one supply and waste system.
Technical Specifications
| Parameter | Value |
|---|---|
| Expansion | single module up to six frames with twelve modules |
| Configuration | over 500 settings down to module level |
| Compatible modules | RCD8, AS8, HP8, LabSpin8, VP8 and CP8 |
| Processes | spin coating, developing, baking and cleaning |
| Options | automatic dispensing and proximity pins for hot plates |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Materials, sample dimensions and process or measurement goal
- Required performance and existing instrument interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about SUSS MicroTec equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Lithography & Patterning
- LP50 R&D Inkjet Printer
A desktop inkjet printer for developing printed material processes in the laboratory. Printheads are exchangeable and it jets solvents, photosensitive and environmentally sensitive inks for electronics, biomedical, energy and photovoltaic research.
- MA12 Gen3 Semi-Automated Mask Aligner and Imprint System
A semi-automated mask aligner and imprint tool for wafers up to 300 mm. It combines full field UV exposure with SMILE imprint technology and a levelling system that measures the exposure gap in real time, covering MEMS, advanced packaging and research work.
- JETx Automated Inkjet Printer
An automated inkjet platform for production deposition of functional materials on wafers up to 300 mm and panels up to 24 by 30 inches. It prints up to four materials in one system and places material only where it is needed, which cuts waste.