NA Needle Drilling System
Brand: Coherent | Category: Scientific & Laboratory Equipment
The NA Needle Drilling System drills blind holes in surgical suture needles. Each hole is drilled with a single shaped long pulse, giving smooth features and minimal thermal damage. It is optimised for holes of 50 to 750 um diameter at aspect ratios as high as 10:1.
Technical Specifications
| Parameter | Value |
|---|---|
| NA 200 N | hole diameter 60 to 330 um, pulse rate 0.8 to 3 Hz |
| NA 302 N | hole diameter 120 to 470 um, pulse rate 0.8 to 3 Hz |
| NA 502 N | hole diameter 320 to 750 um, pulse rate 0.8 to 2 Hz |
| Optimized for holes ranging from 50 to 750 um diameter, aspect ratios as high as 10 | 1 |
| Specification | Needles as small as 160 um can be produced |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Coherent equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Laser Systems
- eM100 Micromachining System
The eM100 is a micromachining system for shaping fine details in superhard materials such as tungsten carbide, advanced ceramics, silicon carbide and boron nitrides. It uses a 100 W infrared nanosecond fibre laser with galvo scanning, and can also cut thinner materials and mark surfaces.
- LFS/QFS with FLBK SC
LFS and QFS with FLBK SC are fibre laser systems for scribing combustion engine connecting rods ahead of hydraulic cracking. The QFS uses a 50 W nanosecond fibre laser and the LFS a 150 W millisecond fibre laser, and both are built to integrate into a production line.
- L45/L60 PCD Surface Lapping/Shaping Tools
The L45 and L60 are laser tools for lapping and shaping polycrystalline diamond disks used in cutting tools and in oil and gas parts. The L45 handles fine and coarse lapping, while the L60 adds beveling, rounding and profiling with no need for pre-lapping.