SSPC: Computer Controlled Spray Drier
Brand: EDIBON | Category: Scientific & Laboratory Equipment
A spray drier for producing powders from aqueous emulsions, solutions, suspensions and colloids. A peristaltic pump feeds the liquid to a nozzle in the drying chamber, so students can relate inlet temperature, feed rate and atomisation to powder yield and moisture.
Technical Specifications
| Parameter | Value |
|---|---|
| Maximum drying capacity | 1000 ml/h approx |
| Temperature range | 40 - 200 ºC (temperature at inlet) |
| Dry air volume range | 0.2 - 0.65 m³/min |
| Feed pump volume range | 102 - 1800 ml/h approx |
| Maximum air pressure | 70 mbar |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Unit Operations Lab
- SDCC: Computer Controlled Spray Dryer and Chiller Unit
A unit that combines spray drying and spray chilling in one chamber, so liquids can be turned into powders either by evaporating the solvent or by solidifying a melt. It allows the two operating modes to be compared on the same feed material.
- SBANC: Computer Controlled Tray Drier
A tray drier consisting of a tunnel through which heated air is passed over trays holding the wet solid. Sample weight, air temperature, humidity and velocity are followed so that drying rate curves and the critical moisture content can be determined.
- BLIO: Freeze Dryer
A freeze dryer that carries out lyophilisation inside a transparent chamber, with control of chamber pressure and of the heated trays. Students follow the freezing, primary drying and secondary drying stages and measure the moisture removed from the product.