SU-305 mobile suction unit
Brand: GEMMY Industrial | Category: Medical Equipment
The largest trolley aspirator in the range at 640 x 395 x 825 mm, carrying two 3000 ml collection jars in glass or plastic with overflow prevention, and a storage cabinet on the back for accessories and tools. It takes either an oil rotary pump at 191 W giving 80 litres per minute and 700 mmHg, or a two cylinder oil-less pump at 270 W giving 70 litres per minute and 680 mmHg. Vacuum is regulated from zero to maximum and read on a built-in gauge covering 0 to 760 mmHg, with a left to right knob switching which bottle draws. Four anti-static rubber castors with two locks carry the unit, and GEMMY notes low noise operation suited to wards and theatres.
Technical Specifications
| Parameter | Value |
|---|---|
| Overall Dimension | 51 x 38 x 88 cm Approx. |
| Vacuum Pump | Oil-less Piston Vacuum Pump |
| Max Airflow Rate | 55 ~ 60L/min (± 5%) |
| Max Vacuum | 720 ~ 740mmHg (± 5%) |
| N.W. | 27.0 kg Approx. |
| Collection Jars | 3,000 ml PC Jar x 2 (Autoclavable) |
| Overflow Protection | Yes |
| Vacuum Gauge | 0 ~ 760 mmHg (0 ~ 30inHg) |
| Standard Accessory | - 3,000 ml PC Jar x 2 - Suction Tubing x 1 - Foot Switch x 1 - Hydrophobic Filter x1 |
| Standards | ISO 13485, CE, QMS, USFDA |
Published manufacturer data for the listed model or variants. Confirm the exact configuration, accessories and test conditions in the quotation. Checked 2026-09-29.
Manufacturer reference document (opens in a new tab)
Confirm your configuration
Share the details you know so we can prepare a comparable, itemised offer.
- Intended load or suction application and required capacity
- Model-specific cycle or flow/vacuum capability, containers and accessories
- Electrical/site requirements, cleaning, validation/acceptance and maintenance
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Clinical, training or facility application
- Required configuration, accessories and existing equipment
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about GEMMY Industrial equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Sterilisation & Suction
- SA-232 portable autoclave
A portable steam steriliser with a 230 mm diameter by 410 mm deep chamber in 304 stainless steel, giving roughly 16 litres in an overall footprint of 335 x 430 x 600 mm. Design temperature is 140 degrees C, with sterilising pressure of 1.4 kg/cm2 at approximately 122 degrees C, and the published cycle table quotes 122 degrees C at 1.12 kg/cm2 for unwrapped, wrapped and liquid loads. Several internal programmes are preset for selection, and GEMMY lists the machine for dental clinics, hospitals and laboratories handling wrapped, unwrapped, liquid and utensil loads. Safety devices are an overheat and low water cut-off switch, a safety valve and a release valve.
- SU-510-1 mobile suction unit
A mobile theatre aspirator measuring 455 x 300 x 710 mm, offered with either an oil rotary pump at 191 W giving 80 litres per minute and 710 mmHg, or a single cylinder oil-less pump at 200 W giving 28 to 33 litres per minute and 680 mmHg. Two 1000 ml polycarbonate collection jars with overflow prevention are switched by a left to right control knob, and a built-in gauge reads 0 to 760 mmHg. GEMMY lists it for suction biopsy, surgery, endometrial curettage and obstetric and gynaecological work, mounted on four anti-static rubber castors of which two lock. It is supplied with two bottles, a footswitch and autoclavable, reusable silicone suction tubing.
- SA-232X bench top autoclave
A bench top steam steriliser with a 230 mm diameter by 390 mm deep chamber in 304 stainless steel, approximately 16 litres, in an overall cabinet of 501 x 406 x 537 mm. Design temperature is 140 degrees C and the published working range for unwrapped, wrapped and liquid loads is 115 to 134 degrees C at 0.9 to 2.1 kg/cm2. GEMMY states the autoclave is manufactured in conformity with directive 93/42/EEC. Safety fittings are a safety valve, an emergency exhaust valve, a release valve, a door safety holder and a pressure control switch.