TravelMax LNR25 Linear Translation Stages, 25 mm Travel, Manual
Brand: ThorLabs | Category: Scientific & Laboratory Equipment
All steel manual translation stages on crossed roller bearings, offered with a micrometer or a differential drive. The rigid thermally matched construction gives uniform motion over the full range and the stages stack into XYZ configurations.
Technical Specifications
| Parameter | Value |
|---|---|
| Travel | 25 mm (1") |
| Minimum step size | 1, 10 or 25 micrometres depending on actuator |
| Horizontal load capacity | 20 kg (44 lbs); vertical 8 kg (17.6 lbs) |
| Runout over full range | plus or minus 1.5 micrometres |
| Bearings | crossed roller; body all steel |
| LNR25D differential drive | 25 micrometres per revolution over a 250 micrometre range |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about ThorLabs equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Optomechanics & Motion Control
- TBB Series Large-Area Translation Stages
Hand operated rack and pinion stages large enough to carry a whole experiment, with a deck height that matches standard breadboards. Fine adjustment is by hex key and the position locks with a setscrew.
- Mounted Longpass Colored Glass Filters (FGL Series)
Schott coloured glass longpass filters mounted in SM1 threaded rings so they screw into lens tubes and filter wheels. Each housing is engraved with the part number and cut-on wavelength, which makes them convenient for teaching laboratories.
- GN and GNL Series Goniometric Stages
Stages that tilt an object about a fixed point above the mounting surface, so the sample stays in place while its angle changes. Two models can be stacked in an XY configuration sharing the same point of rotation.