TTEC: Computer Controlled Bench Top Cooling Tower
Brand: EDIBON | Category: Scientific & Laboratory Equipment
A bench top cooling tower in which heated water is pumped to distribution manifolds at the top of the packing while air is drawn upwards. Students measure approach, range and cooling capacity and construct the energy and mass balance for the tower.
Technical Specifications
| Parameter | Value |
|---|---|
| Air propeller with a fan with speed computer controlled | 145 m³/h max, 3000 rpm |
| Water tank, capacity | 14 l |
| Flow sensor, range | 0.25 to 6.5 l/min |
| Heating element, computer controlled | 60 °C max |
| Electrical supply | single-phase 200 VAC to 240 VAC/50 Hz or 110 VAC to 127 VAC/60 Hz |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Unit Operations Lab
- SBANC: Computer Controlled Tray Drier
A tray drier consisting of a tunnel through which heated air is passed over trays holding the wet solid. Sample weight, air temperature, humidity and velocity are followed so that drying rate curves and the critical moisture content can be determined.
- UDDC: Computer Controlled Batch Distillation Unit
A batch distillation unit with a boiler that accepts interchangeable plate and packed columns. It is used to follow the change in still and distillate composition through a batch, and to study the effect of reflux ratio on separation and on cycle time.
- SSPC: Computer Controlled Spray Drier
A spray drier for producing powders from aqueous emulsions, solutions, suspensions and colloids. A peristaltic pump feeds the liquid to a nozzle in the drying chamber, so students can relate inlet temperature, feed rate and atomisation to powder yield and moisture.