UDDC: Computer Controlled Batch Distillation Unit
Brand: EDIBON | Category: Scientific & Laboratory Equipment
A batch distillation unit with a boiler that accepts interchangeable plate and packed columns. It is used to follow the change in still and distillate composition through a batch, and to study the effect of reflux ratio on separation and on cycle time.
Technical Specifications
| Parameter | Value |
|---|---|
| Working temperature | ambient temperature up to 125 °C |
| Internal diameter | 50 mm |
| Distillation collector of graduated glass, capacity | 2 l |
| Flow sensor, range | 0.25 to 6.5 l/min |
| Length | 1000 mm |
| Electrical supply | single-phase 200 VAC to 240 VAC/50 Hz or 110 VAC to 127 VAC/60 Hz |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Unit Operations Lab
- TTEC: Computer Controlled Bench Top Cooling Tower
A bench top cooling tower in which heated water is pumped to distribution manifolds at the top of the packing while air is drawn upwards. Students measure approach, range and cooling capacity and construct the energy and mass balance for the tower.
- UDCC: Computer Controlled Continuous Distillation Unit
A continuous distillation unit with a boiler that accepts interchangeable columns, an eight plate column and a packed column with Raschig rings being supplied. Students compare plate and packed operation and study reflux ratio, plate efficiency and product composition.
- SBANC: Computer Controlled Tray Drier
A tray drier consisting of a tunnel through which heated air is passed over trays holding the wet solid. Sample weight, air temperature, humidity and velocity are followed so that drying rate curves and the critical moisture content can be determined.