240 Series Input Modules
Brand: Lake Shore | Category: Nanotechnology
The 240 Series Input Modules read cryogenic temperature sensors and pass the measurement onto a distributed control network. They are intended for large scale installations that use PLC based control rather than a single benchtop instrument. They suit systems with many sensor points spread across a facility.
Technical Specifications
| Parameter | Value |
|---|---|
| Inputs | 2 or 8 cryogenic temperature sensor inputs |
| Specification | Temperature monitoring from 1 K to 800 K |
| Specification | PROFIBUS-DP communication for distributed PLC based control |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Materials, sample dimensions and process or measurement goal
- Required performance and existing instrument interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Lake Shore equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Cryogenics & Temperature Control
- Cryogen-Free Cryogenic Cold Trap Cryostats
These cold traps use a mechanical closed-cycle cooler to adsorb noble gases, including helium, neon, argon, krypton and xenon. The cold surface is held below 9 K so gas is captured from a vacuum line without liquid cryogens. Three models cover different upper temperature limits.
- Model 224 Cryogenic Temperature Monitor
The Model 224 is a cryogenic temperature monitor with 12 sensor channels that measures temperature down to 300 mK. It reads silicon diodes and both positive and negative temperature coefficient resistance sensors, using 4-lead differential measurement with current reversal on RTDs.
- Cryogen-Free Exchange Gas Cryostats
These cryostats cool the sample in exchange gas using a closed-cycle refrigerator, so no liquid cryogen is needed. Samples may be solid, liquid or powder, conductive or non-conductive, and are changed in under 10 minutes. A wide choice of feedthrough and window options is offered.