Disintegration Tester ZT 730 Series (ZT 731, ZT 732)
Brand: Erweka | Category: Scientific & Laboratory Equipment
The ZT 730 series determines disintegration time automatically using a cable free AirBasket built around a system of magnets and sensors. It comes with one individually driven test station (ZT 731) or two (ZT 732) and carries an integrated flow through heater. The AirBasket has a sealed electronics compartment, making it dishwasher proof, and durable sensors that allow use in acidic media; it is available as a type A basket with 6 test tubes for standard tablets or a type B basket with 3 test tubes for larger tablets, both to USP / EP / JP standards. Water bath technology uses the thermal inertia of water for a steady test temperature with a PT 100 sensor for constant control, and the 7 inch touchscreen stores and retrieves up to 200 products or methods with their results and parameters.
Technical Specifications
| Parameter | Value |
|---|---|
| Weight | 30 - 35 kg |
| Dimensions (H x W x D) | 667 x 397 x 365 mm |
| Voltage | 230 V/115 V / 1750 Watt; 50-60 Hz |
| Interfaces | USB A, USB B and LAN |
| Test stations | 1 (ZT 731) or 2 (ZT 732) |
| Control | 7" Touch display |
| Stroke height | 55 ± 2 mm |
| Stroke Speed | 30 ± 1 strokes/min |
| Heating | Integrated flow-through heating system (accuracy ± 0.2 °C) |
| Temperature control | External PT 100 temperature sensor |
| Memory | 4 GB memory for 200 products/methods and approx. 10 000 test results |
| Lift drive | Step motor |
| Automatic determination of the disintegration time | AirBasket type A (6 test tubes) or AirBasket type B (3 test tubes plus discs) |
Published manufacturer data for the listed model or variants. Confirm the exact configuration, accessories and test conditions in the quotation. Checked 2026-09-29.
Confirm your configuration
Share the details you know so we can prepare a comparable, itemised offer.
- Test method, dosage form and required throughput
- Exact model configuration, measuring range and method-specific accessories
- Data handling, qualification/calibration documents and operator training
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Intended application, process or teaching activity
- Required capability and equipment it must work with
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Erweka equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
More from Laboratory Instruments
- Friability Tester TAR II
The TAR II is Erweka's upgradeable USP / EP / JP friability and abrasion tester. Its high resolution 7 inch touch display puts the operator's attention on compliant friability testing, with TestAssist automatic calculation guiding the process step by step and an advanced balance connection transferring and calculating data directly. TestAssist offers three testing modes covering revolutions, time and USP test, checking that every parameter is set correctly, and in USP mode it calculates results automatically and triggers repetition of the test where USP guidelines require it. The unit can be configured with one or two test stations plus an optional smart scale, and all of it can be retrofitted later. A stand for the 10 degree position required by USP / EP is included.
- Disintegration Tester ZT 320 Series (ZT 321, ZT 322, ZT 323, ZT 324)
On the ZT 320 series the one to four test stations are driven individually, and each station has its own keypad. Once the required run time is programmed, the basket rack assembly with its loaded samples lowers automatically into the media, and on completion of the preset time or when the stop button is pressed the rack is raised out of the media to prevent further disintegration, which is optional. Temperature shown on the LED display is measured by the standard external sensor sitting either in the water bath or in the test media. Recorded test run parameters can be hard copied through the USB printer interface and the actual disintegration time added manually afterwards.
- Granulate Flow Tester GT Series (GTL, GT, GTB)
Erweka's granulate flow tester family determines the flow behaviour of powders and granules by several measurement methods. The GTL is the entry level device for USP / EP compliant measurement of flowability by weight and by volume, operated through a simple numeric keypad and LC display with printable results. The GT adds a scale so stable weight can be measured during the flow, and on top of the GTL's two methods it measures flowability over a set time and the flow angle with graphical display. The GTB extends the GT with advanced automatic laser measurement of the angle of repose. Accessories such as outlet nozzles of differing diameters, smaller collecting funnels and an optional four stage agitator for poorly flowing samples allow customer specific measurements that are not EP compliant.