Brand: EDIBON | Category: Scientific & Laboratory Equipment

MEPE is used to study the elastic stability of struts and frames. Different bar arrangements are loaded until buckling occurs, so students can measure the critical load and compare it with the theoretical value for each support condition.
| Parameter | Value |
|---|---|
| Dimensions | 800 x 450 x 1000 mm approx |
| Weight | 20 kg approx |
| Length | 520 mm (length of each part: 260 mm) |
| Cross-section | 20 x 20 mm |
| Length of the load bar | 400 mm |
| Length | 300 mm |
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about EDIBON equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
MDLE is used to determine the deflected shape of loaded beams. Dial gauges along the span record deflection under point and distributed loads, so the elastic line can be plotted and compared with results from analytical methods.
STH allows combined loading of a thin walled tube so that different failure theories can be compared. Internal pressure, axial load and torque are applied together and the resulting strains are measured with bonded gauges.
SSM is used to measure the stresses in a thin membrane under pressure. Strain gauges on the membrane are read as pressure is raised, so radial and tangential stresses can be found and compared with plate and shell theory.