Brand: Lake Shore | Category: Nanotechnology

Lake Shore supplies assorted cryogenic accessories, including heat sinks, sample holders, cartridge heaters and vacuum feedthrough products. The HTR-50 cartridge heater is rated 50 W at 50 V into 50 ohms, and the HTR-25-100 is rated 100 W at 50 V into 25 ohms.
| Parameter | Value |
|---|---|
| HTR-50 cartridge heater | 25.4 +/- 2.4 mm (1 +/- 0.094 in), 50 V, 50 Ω, 50 W |
| HTR-25-100 cartridge heater | 25.4 +/- 2.4 mm (1 +/- 0.094 in), 50 V, 25 Ω, 100 W |
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Lake Shore equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
The L40 Gas Dosing series supplies and switches the gases around a sample during a thermal analysis run. Versions are available for ultra high vacuum, atmospheric pressure and high pressure work, with two to four gas lines dosed by electromagnetic valves or mass flow controllers.
VGE-7031 insulating varnish and adhesive is used to bond and anchor sensors and wire at cryogenic temperatures. It is rated to 423 K, has a dry dielectric strength of 118 kV/mm and a volume resistivity above 1 x 10^15 ohm metres. It dries tack-free in 5 to 10 minutes at 298 K.
The L40 GASSAFETY system monitors the gases around a thermal analysis instrument and reacts automatically. Its sensors can be prepared for hydrogen, methane, carbon monoxide, chlorine and other gases. An integrated 3-channel mass flow controller issues an emergency purge if a gas supply runs out.