PLH L53
Brand: Linseis | Category: Nanotechnology
The PLH L53 uses periodic laser heating to determine the thermal diffusivity of thin samples. It covers a diffusivity range of 0.01 to 2000 mm2/s on sample thicknesses of 10 to 500 um, using a continuous wave diode laser. It is used to characterise films, foils and small specimens.
Technical Specifications
| Parameter | Value |
|---|---|
| Temperature range | room temperature up to 300 C |
| Heating rates | 0.01 to 20 C/min |
| Sample thickness | 10 to 500 um |
| Laser source | CW diode laser up to 5 W, wavelength 450 nm |
| Thermal diffusivity range | 0.01 to 2000 mm2/s (thickness dependent) |
| Accuracy | +/-5 %, reproducibility: +/-5 % |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Materials, sample dimensions and process or measurement goal
- Required performance and existing instrument interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Linseis equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Thermal Analysis & Thermophysical Measurement
- THB L56
The THB L56 is a transient hot bridge instrument for thermal conductivity, thermal diffusivity and specific heat capacity. It measures absolute values on solids, liquids, pastes and powders with a sensor placed against the sample. Three model levels, Basic, Advanced and Ultimate, are offered.
- TF-LFA L54
The TF-LFA L54 is a laser flash analyser for thin films. Linseis states measurement of thermal conductivity in the range of 80 nm to 20 um, at temperatures from room temperature up to 500 C. An anisotropy option gives in-plane and cross-plane values on multilayer and 2D materials.
- HFM L57
The HFM L57 is a heat flow meter that determines the thermal conductivity of insulating and low conductivity materials. The sample is held between two temperature-controlled plates and the heat flow through it is measured. Design follows ASTM C518, JIS A1412, ISO 8301, DIN EN 12664 and DIN 12667.