TF-LFA L54
Brand: Linseis | Category: Nanotechnology
The TF-LFA L54 is a laser flash analyser for thin films. Linseis states measurement of thermal conductivity in the range of 80 nm to 20 um, at temperatures from room temperature up to 500 C. An anisotropy option gives in-plane and cross-plane values on multilayer and 2D materials.
Technical Specifications
| Parameter | Value |
|---|---|
| Film thickness | from a few nanometres up to several micrometres |
| Temperature range | room temperature up to 500 C |
| Anisotropy option | in-plane and cross-plane thermal conductivity of multilayer and 2D materials |
| Specification | 3-Omega configurable for both in-plane and cross-plane measurements |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Materials, sample dimensions and process or measurement goal
- Required performance and existing instrument interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Linseis equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Thermal Analysis & Thermophysical Measurement
- PLH L53
The PLH L53 uses periodic laser heating to determine the thermal diffusivity of thin samples. It covers a diffusivity range of 0.01 to 2000 mm2/s on sample thicknesses of 10 to 500 um, using a continuous wave diode laser. It is used to characterise films, foils and small specimens.
- LFA L52
The LFA L52 is a high-power laser flash analyser for thermophysical properties such as thermal diffusivity and thermal conductivity. A laser pulse heats the sample and the transient response is recorded at 2.5 MHz. Measurements run in inert, reducing or oxidising atmospheres, or under vacuum.
- THB L56
The THB L56 is a transient hot bridge instrument for thermal conductivity, thermal diffusivity and specific heat capacity. It measures absolute values on solids, liquids, pastes and powders with a sensor placed against the sample. Three model levels, Basic, Advanced and Ultimate, are offered.