PLS-I Series
Brand: PicoQuant | Category: Nanotechnology
The PLS-I Series are high-power nanosecond pulsed LED sources covering the UV to the visible range. They provide stable excitation for time-resolved measurements, with Peltier cooling held to better than 1 K across an ambient range of 15 °C to 30 °C. They are used in life science and materials science research.
Technical Specifications
| Parameter | Value |
|---|---|
| Peltier cooling stability | better than 1 K for ambient temperature between 15 °C and 30 °C |
| Dimensions with fiber coupling | 76 × 207 mm (diameter × length) |
Get a Quote
Request an itemised quotation covering the proposed configuration, availability, lead time and agreed supply and support scope.
Useful details to share
- Materials, sample dimensions and process or measurement goal
- Required performance and existing instrument interfaces
Share what you know. You can start with your name and a phone number or email; final specifications can follow.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about PicoQuant equipment requirements in Bangladesh.
Phone: +8801805987890 | Email: info@vvon.com.bd
More from Photoluminescence & Time-Resolved Spectroscopy
- Sepia PDL 828
The Sepia PDL 828 is a modular multichannel driver for picosecond diode laser heads. The large mainframe holds one oscillator module and up to eight laser driver modules, each running at 80, 40, 20, 10, 5 or 2.5 MHz with typical jitter of 3 to 5 ps. It supports pulsed, burst and CW excitation.
- PLS Series
The PLS Series are sub-nanosecond pulsed LED sources for fluorescence excitation. The PLS 355 emits at 355 ± 10 nm with a typical pulse width of 900 ps, and the PLS 575 emits at 575 ± 10 nm with a pulse width below 1.3 ns. Both run at repetition rates of up to 10 MHz.
- Sepia PDL 810
The Sepia PDL 810 is a single channel driver for picosecond diode laser heads. It runs in pulsed or continuous wave mode at 80, 40, 20, 10, 5 or 2.5 MHz derived from an 80 MHz base frequency, with typical jitter of 3 to 5 ps. The unit is controlled over a USB 2.0 interface.